120A EV Connectors
Engineering selection paths for EV power connectors around a 120A project requirement, including cable, temperature, sealing and interlock review.
Buyer has a current target near 120A and needs a project-specific connector review instead of selecting by current label alone.
Related requirement terms
Attribute selection route
Use this parameter as one part of product selection
Narrow the product range with this parameter, then confirm application, terminal, sealing, electrical and document requirements before selection.
01
Buyer intent
Buyer has a current target near 120A and needs a project-specific connector review instead of selecting by current label alone.
Understand why this attribute matters for connector selection.
02
Selection notes
A 120A requirement must state whether it is continuous, peak or time-limited current. / Cable cross-section, contact resistance, ambient temperature and enclosure heat affect temperature rise. / Voltage platform, shielding, HVIL, CPA, sealing and touch protection should be reviewed with the mating device.
Avoid choosing connectors by a single parameter only.
03
Matching products
3 product records currently mapped to this attribute.
Open product records and compare technical fields.
04
RFQ checklist
Continuous and peak current with duty cycle / Voltage platform and cable cross-section / Shielding, HVIL, sealing and touch-protection requirements
Prepare enough information for engineering confirmation.
Selection notes
What buyers should verify
Attribute pages prevent buyers from choosing connectors by one parameter only.
A 120A requirement must state whether it is continuous, peak or time-limited current.
Cable cross-section, contact resistance, ambient temperature and enclosure heat affect temperature rise.
Voltage platform, shielding, HVIL, CPA, sealing and touch protection should be reviewed with the mating device.
RFQ checklist
Continuous and peak current with duty cycle
Voltage platform and cable cross-section
Shielding, HVIL, sealing and touch-protection requirements
Module interface drawing and validation requirement
Recommended products
Product records matching this attribute
These product records provide structured specification fields, related products and RFQ routing.
120A EV Power Connector
A 120A EV power connector option for battery, inverter and power distribution projects requiring waterproof high-current connection.
Pin: 2 Pole
Voltage: 600V
IP: IP67
High Voltage EV Battery Connector
A high-voltage connector concept for EV battery pack and power distribution applications that require current capacity, waterproof design and engineering review.
Pin: 2 Pole
Voltage: 800V
IP: IP67
HVIL High Voltage Interlock Connector
A high voltage interlock connector path for EV battery and powertrain systems requiring safety loop signal continuity.
Pin: 2 Pin
Voltage: 800V system
IP: IP67
Application paths
Related solution pages
Use solution pages when the buyer knows the vehicle system or application problem.
EV Battery Connection Solution
High-voltage and sealed connector support for EV battery pack, charging and power distribution applications.
View SolutionEV Power Distribution Connection Solution
High-voltage connector support for EV PDU, inverter, battery output and power distribution wiring.
View SolutionOBC DC-DC Connector Solution
High-voltage and signal connector review for onboard charger, DC-DC converter and EV power electronics modules.
View SolutionRelated specification questions
Common ways buyers describe this requirement
Use these related requirement descriptions to clarify whether the same connector attribute and selection path applies.
EV High Voltage Connector Manufacturer
Buyer wants high-voltage connector support for EV battery, charging, inverter or power distribution applications.
Included in this selection guidePDU High Voltage Connector
Buyer needs high-voltage connectors for EV power distribution unit, battery pack or inverter connection.
Included in this selection guideEV OBC Connector
Buyer needs connector support for EV onboard charger, DC-DC converter or power electronics module interfaces.
Included in this selection guideFAQ
120A EV Connectors questions
Short answers designed for buyers comparing attributes before sending an RFQ.
Does a 120A label guarantee 120A in every installation?
No. Usable current depends on cable, contact, temperature, enclosure, duty cycle and the approved validation conditions.
What information is needed to review a 120A EV connector?
Provide voltage, continuous and peak current, cable size, temperature, sealing, shielding, interlock and mating-interface information.
Need engineering confirmation for 120A EV Connectors?
Send application, drawings, samples, wire size, IP rating and expected quantity. WEUP can route the requirement into the right connector family.