350A EV Connectors
High-current EV connector selection paths for battery, power distribution and charging projects with a target near 350A.
Buyer needs a high-current interface and must validate the complete cable-and-connector assembly under project operating conditions.
Related requirement terms
Attribute selection route
Use this parameter as one part of product selection
Narrow the product range with this parameter, then confirm application, terminal, sealing, electrical and document requirements before selection.
01
Buyer intent
Buyer needs a high-current interface and must validate the complete cable-and-connector assembly under project operating conditions.
Understand why this attribute matters for connector selection.
02
Selection notes
Clarify whether 350A is continuous, peak or charging current and define the duty cycle. / Cable size, conductor construction, contact resistance, cooling and ambient temperature affect thermal performance. / High-current projects require controlled review of voltage, spacing, shielding, interlock, sealing, touch protection and mating geometry.
Avoid choosing connectors by a single parameter only.
03
Matching products
3 product records currently mapped to this attribute.
Open product records and compare technical fields.
04
RFQ checklist
Voltage platform, current profile and duty cycle / Cable size, cable OD, shielding and exit direction / HVIL, CPA, IP and touch-protection requirements
Prepare enough information for engineering confirmation.
Selection notes
What buyers should verify
Attribute pages prevent buyers from choosing connectors by one parameter only.
Clarify whether 350A is continuous, peak or charging current and define the duty cycle.
Cable size, conductor construction, contact resistance, cooling and ambient temperature affect thermal performance.
High-current projects require controlled review of voltage, spacing, shielding, interlock, sealing, touch protection and mating geometry.
RFQ checklist
Voltage platform, current profile and duty cycle
Cable size, cable OD, shielding and exit direction
HVIL, CPA, IP and touch-protection requirements
Mating interface, packaging space and test specification
Recommended products
Product records matching this attribute
These product records provide structured specification fields, related products and RFQ routing.
350A EV High Voltage Connector
A 350A EV high voltage connector page for battery, inverter and power distribution applications requiring engineering validation.
Pin: 2 Pole
Voltage: 800V
IP: IP67
800V EV Battery Connector
An 800V EV battery connector page for battery pack, PDU and high-voltage vehicle power systems requiring cable, safety and sealing review.
Pin: 2 Pole
Voltage: 800V
IP: IP67 / IP68 project target
High Voltage EV Battery Connector
A high-voltage connector concept for EV battery pack and power distribution applications that require current capacity, waterproof design and engineering review.
Pin: 2 Pole
Voltage: 800V
IP: IP67
Application paths
Related solution pages
Use solution pages when the buyer knows the vehicle system or application problem.
EV Battery Connection Solution
High-voltage and sealed connector support for EV battery pack, charging and power distribution applications.
View SolutionEV Power Distribution Connection Solution
High-voltage connector support for EV PDU, inverter, battery output and power distribution wiring.
View SolutionEV Charging Inlet Connection Solution
Connector support for EV charging inlet signal, interlock, auxiliary power and waterproof harness connection paths.
View SolutionRelated specification questions
Common ways buyers describe this requirement
Use these related requirement descriptions to clarify whether the same connector attribute and selection path applies.
EV High Voltage Connector Manufacturer
Buyer wants high-voltage connector support for EV battery, charging, inverter or power distribution applications.
Included in this selection guideHigh Voltage Automotive Connector Manufacturer
Buyer wants high-voltage automotive connector options for EV battery, inverter, charging or power distribution.
Included in this selection guideEV Battery Connector Manufacturer
EV buyer wants battery connector support by voltage, current, cable size, sealing and safety requirement.
Included in this selection guideFAQ
350A EV Connectors questions
Short answers designed for buyers comparing attributes before sending an RFQ.
Can a 350A connector be selected from current alone?
No. The cable assembly, temperature rise, voltage, duty cycle, environment, protection features and mating interface must be evaluated together.
Is cooling always required at 350A?
Not always. Cooling requirements depend on current profile, conductor size, contact resistance, ambient temperature and the system design.
Need engineering confirmation for 350A EV Connectors?
Send application, drawings, samples, wire size, IP rating and expected quantity. WEUP can route the requirement into the right connector family.