Automotive Connectors

8 Pin Automotive ECU Connector

An 8 pin ECU connector path for low-voltage control module and automotive electronics applications requiring stable signal connection.

Request Quote View Specifications

8 pin automotive ECU wire-to-board connector kit with 2x4 signal cavities, PCB header, terminals and thin signal wires

Model

AC-ECU-008

Application

ECU

Quick specification

8 Pin24V5AApplication dependentPBT-40°C to 105°C

Connector Type

Wire-to-board connector

Terminal

Signal crimp terminal

Vehicle System

ECU / Control Module

Buying decision

How procurement teams should qualify this product

This product page is structured to help buyers move from product discovery to technical confirmation, document request and RFQ without guessing which information matters.

Request Product Review Compare Technical Data

StepDecisionBuyer questionProduct evidenceNext action

Confirm application fit

Is this connector suitable for the vehicle system?

Wire-to-board connector for ECU and ECU / Control Module.

Check system location

Check electrical and environment

Can it meet voltage, current, sealing and temperature needs?

24V, 5A, Application dependent, -40°C to 105°C.

Compare specification

Review terminal and mating

Can housing, terminal, seal and wire range be matched?

Compact signal terminal, 0.22-0.75 mm² signal wire, Usually unsealed or module-sealed depending on ECU housing..

Request fit review

Prepare RFQ package

What should be sent for a useful quotation?

Drawing, sample photo, reference model, target quantity and application environment.

Submit engineering RFQ

Overview

Product overview

An 8 pin ECU connector path for low-voltage control module and automotive electronics applications requiring stable signal connection.

ECU application

Signal terminal support

Compact control module interface

Electronics supplier review

Specifications

Technical specification

Use these values to compare the product with your electrical, mechanical and environmental requirements. Final fit should be confirmed against the mating interface and application drawing.

Model Number	AC-ECU-008
Connector Type	Wire-to-board connector
Pin Number	8 Pin
Voltage Rating	24V
Current Rating	5A
Material	PBT
IP Rating	Application dependent
Operating Temperature	-40°C to 105°C
Terminal Type	Signal crimp terminal
Wire Range	0.22-0.75 mm² signal wire
Terminal Series	Compact signal terminal
Seal Structure	Usually unsealed or module-sealed depending on ECU housing.
Locking Structure	Board or module latch direction must match ECU packaging.
Mating Part	ECU header or wire-to-board mating connector.
Vehicle System	ECU / Control Module
Certification	Automotive electronics review
Technical Files	Datasheet, drawing and 3D file availability is confirmed by exact model, revision and project requirement.

Applications

Typical automotive applications

8 Pin Automotive ECU Connector is intended for ECU and ECU / Control Module. Confirm installation location, exposure, mating cycles and cable routing before final selection.

Application

ECU

Vehicle System

ECU / Control Module

Connector Type

Wire-to-board connector

Fit confirmation

Mating, terminal and document review

Connector selection is completed as a system. Confirm the mating interface, terminal and seal combination before samples or production quotation.

Mating interface

ECU header or wire-to-board mating connector.

Terminal and wire

Signal crimp terminal; 0.22-0.75 mm² signal wire.

Controlled documents

Request the model-specific datasheet, 2D drawing, cavity layout or controlled 3D file with your project details.

RFQ checklist

Information needed before quotation

Complete product requirements help confirm whether the model, terminal, seal and application path are suitable.

Confirm pin number: 8 Pin

Confirm electrical requirement: 24V / 5A

Confirm environment and IP rating: Application dependent

Upload drawing, sample photo or equivalent model if available

FAQ

Product RFQ questions

Common questions to confirm before requesting samples, drawings or quotation.

Can I request samples and technical drawings?

Yes. Send the AC-ECU-008 application, expected quantity and any reference drawing or sample photo. Sample, datasheet, 2D drawing and controlled 3D file availability will be confirmed for the exact model before release.

Can this connector be customized for an OEM project?

Housing color, keying, wire length, terminal, seal and packaging options can be reviewed after the mating interface, electrical load, environment and annual demand are confirmed.

How are the housing, terminal and seal matched?

Matching is reviewed as a complete connection system. Provide the mating part, wire range, insulation diameter and target IP rating so the Signal crimp terminal terminal and seal combination can be checked.