EV Charging Interlock Connector
An EV charging interlock connector concept for charging control, safety signal and waterproof vehicle electrical applications.
Model
AC-EV-ILK
Application
Charging System
Quick specification
Connector Type
EV signal connector
Terminal
Signal terminal
Vehicle System
EV Charging / Interlock
Buying decision
How procurement teams should qualify this product
This product page is structured to help buyers move from product discovery to technical confirmation, document request and RFQ without guessing which information matters.
01
Confirm application fit
Is this connector suitable for the vehicle system?
EV signal connector for Charging System and EV Charging / Interlock.
Check system location
02
Check electrical and environment
Can it meet voltage, current, sealing and temperature needs?
60V, 5A, IP67, -40°C to 125°C.
Compare specification
03
Review terminal and mating
Can housing, terminal, seal and wire range be matched?
Compact signal terminal, 0.35-0.75 mm² signal wire, IP67 target if mounted near charging inlet or outdoor exposure..
Request fit review
04
Prepare RFQ package
What should be sent for a useful quotation?
Drawing, sample photo, reference model, target quantity and application environment.
Submit engineering RFQ
Overview
Product overview
An EV charging interlock connector concept for charging control, safety signal and waterproof vehicle electrical applications.
EV charging application
Interlock signal path
IP67 design review
Project validation support
Specifications
Technical specification
Use these values to compare the product with your electrical, mechanical and environmental requirements. Final fit should be confirmed against the mating interface and application drawing.
| Model Number | AC-EV-ILK |
|---|---|
| Connector Type | EV signal connector |
| Pin Number | 4 Pin |
| Voltage Rating | 60V |
| Current Rating | 5A |
| Material | High-temp PA |
| IP Rating | IP67 |
| Operating Temperature | -40°C to 125°C |
| Terminal Type | Signal terminal |
| Wire Range | 0.35-0.75 mm² signal wire |
| Terminal Series | Compact signal terminal |
| Seal Structure | IP67 target if mounted near charging inlet or outdoor exposure. |
| Locking Structure | Interlock safety signal continuity must be reviewed with full charging interface. |
| Mating Part | Charging inlet, lock actuator or safety loop mating connector. |
| Vehicle System | EV Charging / Interlock |
| Certification | Project-based validation |
| Technical Files | Datasheet, drawing and 3D file availability is confirmed by exact model, revision and project requirement. |
Applications
Typical automotive applications
EV Charging Interlock Connector is intended for Charging System and EV Charging / Interlock. Confirm installation location, exposure, mating cycles and cable routing before final selection.
Application
Charging System
Vehicle System
EV Charging / Interlock
Connector Type
EV signal connector
Fit confirmation
Mating, terminal and document review
Connector selection is completed as a system. Confirm the mating interface, terminal and seal combination before samples or production quotation.
Mating interface
Charging inlet, lock actuator or safety loop mating connector.
Terminal and wire
Signal terminal; 0.35-0.75 mm² signal wire.
Controlled documents
Request the model-specific datasheet, 2D drawing, cavity layout or controlled 3D file with your project details.
RFQ checklist
Information needed before quotation
Complete product requirements help confirm whether the model, terminal, seal and application path are suitable.
Confirm pin number: 4 Pin
Confirm electrical requirement: 60V / 5A
Confirm environment and IP rating: IP67
Upload drawing, sample photo or equivalent model if available
FAQ
Product RFQ questions
Common questions to confirm before requesting samples, drawings or quotation.
Can I request samples and technical drawings?
Yes. Send the AC-EV-ILK application, expected quantity and any reference drawing or sample photo. Sample, datasheet, 2D drawing and controlled 3D file availability will be confirmed for the exact model before release.
Can this connector be customized for an OEM project?
Housing color, keying, wire length, terminal, seal and packaging options can be reviewed after the mating interface, electrical load, environment and annual demand are confirmed.
How are the housing, terminal and seal matched?
Matching is reviewed as a complete connection system. Provide the mating part, wire range, insulation diameter and target IP rating so the Signal terminal terminal and seal combination can be checked.
Related
Related products
Related products help procurement teams compare connector options before submitting RFQ.
Need a comparable product?
Send the drawing, reference model or sample photo and the engineering team will review suitable connector families.
Request Alternatives