Automotive Lighting Connection Solution
Connector and terminal matching support for headlamp, tail lamp, auxiliary lighting and exterior vehicle lighting harnesses.
Industry
Automotive Lighting Supplier
Application
Vehicle Lighting
Solution decision path
From application problem to connector selection
Use this route to turn an operating condition into technical requirements, suitable product families and a complete RFQ package.
01
Application problem
What operating condition is creating connector risk?
Lighting projects need compact connector housings, sealed options, stable terminals and fast sample review for different lamp modules.
Define use case
02
Connector requirement
Which technical requirements must be confirmed first?
Application: headlamp, tail lamp, auxiliary lamp and exterior lighting / Pin Range: 2 pin, 3 pin, 4 pin and multi-pin connector options / Waterproof: sealed connector path for exterior locations
Check requirements
03
Product route
Which product families should be reviewed for this solution?
2 Pin Waterproof Automotive Connector / 3 Pin Automotive Wire Harness Connector / 4 Pin IP67 Waterproof Automotive Connector
Review products
04
RFQ evidence
What information should the buyer prepare before quotation?
Lamp type and installation position / Pin count, voltage and current / Wire size and waterproof requirement
Submit project RFQ
Application challenge
Customer problem
Lighting projects need compact connector housings, sealed options, stable terminals and fast sample review for different lamp modules.
Lighting connector selection
Sealed housing review
Terminal matching
Harness sample support
Connector requirements
Application
headlamp, tail lamp, auxiliary lamp and exterior lighting
Pin Range
2 pin, 3 pin, 4 pin and multi-pin connector options
Waterproof
sealed connector path for exterior locations
Terminal
crimp terminal and wire range matching
Engineering review
Technical risks to confirm before product selection
These points help buyers understand why connector selection should be reviewed by application, not only by product name or pin count.
Exterior lighting connectors need waterproof review even when current is low.
Wrong terminal series can cause poor crimp or unstable lamp connection.
Lamp module packaging may require latch direction and mating interface confirmation.
RFQ information checklist
Lamp type and installation position
Pin count, voltage and current
Wire size and waterproof requirement
Mating connector or lamp-side drawing
Sample and annual quantity
Recommended products
Product options for this solution
Use these product records as a starting point. Final selection depends on the mating interface, electrical load, environment, cable and validation requirements.
2 Pin Waterproof Automotive Connector
Sealed wire-to-wire
- Pin
- 2 Pin
- Voltage
- 24V
- Current
- 10A
- IP
- IP67
3 Pin Automotive Wire Harness Connector
Wire harness connector
- Pin
- 3 Pin
- Voltage
- 24V
- Current
- 12A
- IP
- IP65
4 Pin IP67 Waterproof Automotive Connector
Sealed wire-to-wire
- Pin
- 4 Pin
- Voltage
- 24V
- Current
- 10A
- IP
- IP67
2.8mm Sealed Automotive Power Connector
Sealed power harness connector
- Pin
- 2.8mm Series
- Voltage
- 24V
- Current
- 20A
- IP
- IP67
Manufacturing support
Engineering and production support
Support can be coordinated from requirement review and product matching through samples, tooling discussion, testing requirements and production preparation.
Requirement review
Connector selection
Tooling support
Sample testing
Mass production
Quality inspection
Solution FAQ
Do automotive lighting connectors need waterproof design?
Exterior lighting and exposed harness locations usually need sealed connectors or waterproof review.
Need this connection solution reviewed?
Send application, drawing, voltage, current, environment and annual demand. We will match product options and engineering requirements.