2.8mm Automotive Terminals
2.8mm terminal paths for lighting, relay box, power harness and low-voltage automotive power distribution.
Buyer searches by terminal series and needs current, wire range, crimp and housing matching support.
Related requirement terms
Attribute selection route
Use this parameter as one part of product selection
Narrow the product range with this parameter, then confirm application, terminal, sealing, electrical and document requirements before selection.
01
Buyer intent
Buyer searches by terminal series and needs current, wire range, crimp and housing matching support.
Understand why this attribute matters for connector selection.
02
Selection notes
2.8mm terminals are often selected for higher current than compact signal terminals. / Current load, material thickness and wire size should be reviewed before quotation. / Relay box and lighting applications may require different housing and sealing paths.
Avoid choosing connectors by a single parameter only.
03
Matching products
3 product records currently mapped to this attribute.
Open product records and compare technical fields.
04
RFQ checklist
Current load and wire size / Terminal drawing, plating and material request / Housing or relay/fuse box interface
Prepare enough information for engineering confirmation.
Selection notes
What buyers should verify
Attribute pages prevent buyers from choosing connectors by one parameter only.
2.8mm terminals are often selected for higher current than compact signal terminals.
Current load, material thickness and wire size should be reviewed before quotation.
Relay box and lighting applications may require different housing and sealing paths.
RFQ checklist
Current load and wire size
Terminal drawing, plating and material request
Housing or relay/fuse box interface
Sample and monthly demand
Recommended products
Product records matching this attribute
These product records provide structured specification fields, related products and RFQ routing.
2.8mm Automotive Wire Harness Connector
A 2.8mm series automotive wire harness connector for power, lighting and harness assembly projects requiring higher current capacity.
Pin: 2.8mm Series
Voltage: 24V
IP: IP65
2.8mm Sealed Automotive Power Connector
A 2.8mm sealed automotive power connector page for lighting, fan, relay and higher-current harness applications.
Pin: 2.8mm Series
Voltage: 24V
IP: IP67
2.8mm Automotive Relay Box Terminal
A 2.8mm automotive relay box terminal page for low-voltage power distribution, relay and fuse box applications.
Pin: 2.8mm
Voltage: 24V
IP: Housing dependent
Application paths
Related solution pages
Use solution pages when the buyer knows the vehicle system or application problem.
Fuse Box and Relay Box Connection Solution
Power terminal and connector support for automotive fuse box, relay box and low-voltage power distribution applications.
View SolutionAutomotive Lighting Connection Solution
Connector and terminal matching support for headlamp, tail lamp, auxiliary lighting and exterior vehicle lighting harnesses.
View SolutionWiring Harness Solution
Connector, terminal, seal and housing support for automotive wiring harness manufacturers.
View SolutionRelated specification questions
Common ways buyers describe this requirement
Use these related requirement descriptions to clarify whether the same connector attribute and selection path applies.
2.8mm Automotive Connector
Buyer searches by terminal series and needs connector housing, terminal and seal matching.
Included in this selection guideAutomotive Relay Box Terminal
Buyer needs terminals for relay box, fuse box or low-voltage vehicle power distribution applications.
Included in this selection guideFAQ
2.8mm Automotive Terminals questions
Short answers designed for buyers comparing attributes before sending an RFQ.
Where are 2.8mm automotive terminals used?
They are often used in lighting, relay, fan, power harness and low-voltage power distribution applications.
Need engineering confirmation for 2.8mm Automotive Terminals?
Send application, drawings, samples, wire size, IP rating and expected quantity. WEUP can route the requirement into the right connector family.